Ultra-bond is a highly acrylic
water bond penetrating primer
or undercoat that has excellent
flexibility and impact resistant
properties on all surfaces it's
applied to. Ultra-Bond is suitable
for application over old and new
concrete, slates, bricks, plaster,
asbestos, roof tiles, hard boards,
chip boards; aluminium galvanized
steel, painted areas, etc. More info...
Ultra-Seal is a water bond, ready
to apply elastic waterproofing
sealant for filling and sealing
cracks and joints in metal,
concrete and wood surfaces,
which prevents water penetration.
When cured, it forms a tough,
highly durable, flexible seal that
has ultimate protection properties
and can tolerate thermal shrinkage
movements of the substrates. It is
ideal for application to metal roofs,
parapets, dams, gutters, down pipes,
concrete roofs, pre-cast panel walls,
glazing, etc. More info...
Ultra-Concrete Seal is a highly
acrylic water bond, low viscosity,
and penetrating primer or
undercoat. It reacts with substrates
to ensure better adhesion
with excellent impact resistant
properties on all surfaces. Ultra-
Concrete Sealer is suitable for
application over old and new
concrete, slates, bricks, plaster
and roof tiles. More info...
Ultra-Paint acts as a one-way
membrane, allowing moisture to
escape to the surface but prevents
moisture ingress into the treated
substrate. More info...
Ultra-Treat is formulated with
an excellent rust-block additive
that protects all types of metal
against corrosion. The product is
ideal for areas such as metal, rolled
steel, mild steel, stainless steel, etc. More info...
Ultra-Clean is a water-based multi
purpose cleaner and degreaser
for application to metallic and
porous substrates such as concrete,
wood, gypsum board and plaster,
as well as ferrous and non-ferrous
surfaces such as aluminium and
intact galvanising. Can also be
used to remove algae, stains from
baths, cement from bricks, etc.
Not recommended for use on
fabric material unless tested. An
additional advantage is the absence
of toxic fumes during application. More info...
Ultra-Screed is an acrylic-based
floor screed for high impact
areas. The product's principal
characteristic is to build high
films that cover irregular surfaces.
Similar to the other Ultralast
products, Ultra-Screed has good
waterproofing qualities, excellent
abrasion resistance ideal for
vibrating structures, and is nontoxic
with negligible hazardous air
pollutants. More info...
Ultra-Varnish is a water bond
acrylic, electrometric membrane
that is formulated as a clear
product and which provides superb
sealing qualities. It penetrates deep
into the surface and reduces oil,
grease, acids, and alkalis seeping
into the surface and causing
deterioration. The acrylic resin
enables it to bridge hair line and
minor cracks within the substrate.
It also keeps dust down and forms
a durable waterproofed surface,
which is chemical and abrasion
resistant. Ultra-Varnish is used
alone as waterproofing coating
where the natural colour is to
be preserved, such as face brick,
wooden doors and window
frames, roof tiles, stones, etc.
Furthermore, it could also be used
as reinforcement to fibreglass to
gain maximum benefit. More info...
Ultra-Thatch is a water bond
acrylic membrane that is
formulated in a variety of colours
and provides sealing and fire
retardant qualities. Ultra-Thatch is
used to delay the normal thatch or
brush fencing rotting process and
subsequently lengthens the life of
the roof or fence. It also keeps the
thatch sturdy and prevents birds
from pulling out thatch. If sprayed
on the inside it prevents dust
rains in the house. Ultra-Thatch
waterproofs the roof, which will
reduce the weight of the roof.
It also eliminates the required
frequent brushing and re-thatching
of roofs. More info...
Ultra-Road is a pure acrylic
emulsion paint for application to
tar/bitumen and concrete roads. More info...
Ultra-Rubberguard is a UV
resistant, acrylic based rubberising
compound for corrosion
protection and moderate abrasion
applications. The coating can
be applied up to 6 mm thick.
Materials are water based and
non-toxic. No noxious fumes
during painting and no need for
solvents. Multiple coats can be
applied on the same day if higher
dry film thickness is required. Not
recommended for use on substrates
that are permanently submerged
in water. More info...