Australia Ph: (03) 9852 0411   International Ph: +61 2 8625 4531   Ultralast Australia Pty Ltd

Surface Preperation - Aluminium

The Aluminium surface you are working with may have to be treated differently depending on its current state

New / uncoated

For optimal results on a Aluminium surface in a New / uncoated state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Degrease the surface with G.P. Cleaner using Scotchbrite pads
  2. Rinse with clean water
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 final coats of colour
Products used
Previously painted & sound

For optimal results on a Aluminium surface in a Previously painted & sound state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Abrade with fine wet or dry sand paper using Bind as a lubricant
  2. Rinse with clean water
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 final coats of colour
Products used
Previously painted & flaking

For optimal results on a Aluminium surface in a Previously painted & flaking state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove existing coating with paint stripper, or by Scrapes
  2. Degrease surface with G.P. Cleaner using Scotchbrite pads
  3. Rinse with clean water
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 final coats of colour
Products used
Original finish (Not coloured)

For optimal results on a Aluminium surface in a Original finish (Not coloured) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove existing coating with paint stripper, or by Scrapes
  2. Degrease surface with G.P. Cleaner using Scotchbrite pads
  3. Rinse with clean water
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of Ultra-Clear
Products used