Australia Ph: (03) 9852 0411   International Ph: +61 2 8625 4531   Ultralast Australia Pty Ltd

Surface Preperation - Concrete

The Concrete surface you are working with may have to be treated differently depending on its current state.

New / unpainted

For optimal results on a Concrete surface in a New\unpainted state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove all loose sand aggregate with brooms
  2. Rinse with clean water
Application
  1. Apply 1 coat Bind
  2. Apply 3-5 coats SelfCoat Screed of colour
Products used
Old / unpainted / sound

FFor optimal results on a Concrete surface in a Old \unpainted\ sound state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Wash floors with G.P. Cleaner
  2. Rinse well with clean water
Application
  1. Apply 1 coat Bind
  2. Apply 3-5 coats SelfCoat Screed of colour
  3. Allow 2 hours between coats
Products used
Previously painted and sound

For optimal results on a Concrete surface in a Previously painted And sound state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Wash with G.P. Cleaner
  2. Rinse with clean water
  3. Sand floor with 100 grid paper to provide a better key
  4. Remove all dust
Application
  1. Apply 1 coat Bind
  2. Apply 3-5 coats SelfCoat Screed of colour
Products used
Previously painted and in poor condition (flaking & peeling)

For optimal results on a Concrete surface in a Previously painted and in poor condition (flaking & peeling) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove old paint by mechanical grinding
  2. Strip existing paint with paint remover
  3. Scrub floor with 15% solution of spirit of Salts
  4. Rinse with clean water
  5. Wash floors with G.P. Cleaner6. Rinse with clean water
Application
  1. Apply 1 coat Bind
  2. Apply 3-5 coats SelfCoat Screed of colour
  3. When oil patches appear on floor, STAY AWAY!
  4. NOT for workshops!
Products used