Australia Ph: (03) 9852 0411   International Ph: +61 2 8625 4531   Ultralast Australia Pty Ltd

Surface Preperation - Concrete

The Copper surface you are working with may have to be treated differently depending on its current state.

New / unpainted (Water pipes)

For optimal results on a Copper surface in a New / unpainted (Water pipes) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Apply SelfCoat Prep to surface
  2. Rinse with clean water
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of colour
Products used
Previously painted and peeling

For optimal results on a Copper surface in a Previously painted and peeling state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove old paint
  2. Apply SelfCoat Prep to surface
  3. Rinse with clean water
Application
  1. Apply 1 coat Bind
  2. Apply 3-5 coats SelfCoat Screed of colour
  3. Allow 2 hours between coats
Products used