Australia Ph: (03) 9852 0411   International Ph: +61 2 8625 4531   Ultralast Australia Pty Ltd

Surface Preperation - Concrete

The Fibre Glass surface you are working with may have to be treated differently depending on its current state.

New / unpainted

For optimal results on a Fibre Glass surface in a New / unpainted state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Abrade surface with G.P. Cleaner with Scotchbrite pads
  2. Rinse with clean water
  3. Sand down and rinse again
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of colour
Products used
Paint work in poor condition

For optimal results on a Fibre Glass surface in a Paint work in poor condition state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove all loose paint by scraping and sanding
  2. Wash down with G.P. Cleaner
  3. Sand thoroughly with 200 grit sand paper
  4. Wipe off dust
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of colour
Products used