Australia Ph: (03) 9852 0411   International Ph: +61 2 8625 4531   Ultralast Australia Pty Ltd

Surface Preperation - Concrete

The Glazed Tiles surface you are working with may have to be treated differently depending on its current state.

Old and unpainted

For optimal results on a Glazed Tiles surface in a Old and unpainted state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Apply SelfCoat Prep to tiles to remove dirt and algae
  2. Rinse with clean water and bicarbonate of soda
  3. Wash thoroughly with G.P. Cleaner
  4. Rinse well with clean water
  5. Abrade surface with wet-or-dry abrasive paper. (Use Bind in place of water)
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of Ultra-Coat
Products used
Unpainted / Rusted

For optimal results on a Galvanized Iron surface in a Unpainted / Rusted state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove all loose and flaking rust
  2. Do not use a rust remover due to chemical reaction with paint products which could cause flaking
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of Ultra-Metal Treat
  3. Apply 2 coats of Ultra-Coat
Products used