Australia Ph: (03) 9852 0411   International Ph: +61 2 8625 4531   Ultralast Australia Pty Ltd

Surface Preperation - Concrete

The Timber surface you are working with may have to be treated differently depending on its current state.

New / unpainted (Wood Finish)

For optimal results on a Timber surface in a New / unpainted (Wood Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Sand down
  2. Remove dust
Application
  1. Apply 1 coat Bind
  2. Sand down with 150 mm grit paper (or liner)
  3. Apply another coat of Bind
  4. Apply 2 coats of Clear Guard of Colour
Products used
New / unpainted (Paint Finish)

For optimal results on a Timber surface in a New / unpainted (Paint Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Sand down
  2. Remove dust
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of Ultra-Coat
Products used
Previously painted (Wood Finish)

For optimal results on a Timber surface in a Previously painted (Wood Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove all dirt and loose paint by coarse sanding or paint stripper if necessary
  2. If paint stripper has been used, wipe down with laquer thinners
  3. Sand down with 150 grit paper
  4. Dust off
Application
  1. Apply 1 coat Bind
  2. Sand down with 150 mm grit paper (or liner).
  3. Apply another coat of Bind
  4. Apply 2 coats of Clear Guard of Colour
Products used
Previously painted (Paint Finish)

For optimal results on a Timber surface in a Previously painted (Paint Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Remove all dirt and loose paint by coarse sanding or paint stripper if necessary
  2. If paint stripper has been used, wipe down with laquer thinners
  3. Sand down with 150 grit paper
  4. Dust off
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of Ultra-Coat
Products used
Split pole fencing (Wood Finish)

For optimal results on a Timber surface in a Split pole fencing (Wood Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Ensure surface is clean
  2. Sand of loose fibre ends in partularly rough areas and dust off
Application
  1. Apply 1 coat Bind
  2. Sand down with 150 mm grit paper (or liner)
  3. Apply another coat of Bind
  4. Apply 2 coats of Clear Guard of Colour
Products used
Split pole fencing (Paint Finish)

For optimal results on a Timber surface in a Split pole fencing (Paint Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Ensure surface is clean
  2. Sand of loose fibre ends in partularly rough areas and dust off
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of Ultra-Coat
Products used
Blackened / weathered (Wood Finish)

For optimal results on a Timber surface in a Blackened / weathered (Wood Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Rub down blackened layers with steel wool and a solution of washing soda (500g dissolved in 3 liter warm water.)
  2. Rinse with clean water and allow to dry
  3. Sand smooth with 150 mm grit paper and wipe clean
Application
  1. Apply 1 coat Bind
  2. Sand down with 150 mm grit paper (or liner)
  3. Apply another coat of Bind
  4. Apply 2 coats of Clear Guard of Colour
Products used
Blackened / weathered (Paint Finish)

For optimal results on a Timber surface in a Blackened / weathered (Paint Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Rub down blackened layers with steel wool and a solution of washing soda (500g dissolved in 3 liter warm water.)
  2. Rinse with clean water and allow to dry
  3. Sand smooth with 150 mm grit paper and wipe clean
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of Ultra-Coat
Products used
Oil and presservative dressing (Wood Finish)

For optimal results on a Timber surface in a Oil and presservative dressing (Wood Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Apply a paint stripper
  2. Rub with steel wool and laquer thinners
  3. Rinse with clean water
  4. Allow to dry5. Sand down to a smooth finish
Application
  1. Apply 1 coat Bind
  2. Sand down with 150 mm grit paper (or liner)
  3. Apply another coat of Bind
  4. Apply 2 coats of Clear Guard of Colour
Products used
Oil and presservative dressing (Paint Finish)

For optimal results on a Timber surface in a Oil and presservative dressing (Paint Finish) state, please follow the instructions below for preparation and application. Links to the products utilised in this guide are listed below.

Preperation
  1. Apply a paint stripper
  2. Rub with steel wool and laquer thinners
  3. Rinse with clean water
  4. Allow to dry5. Sand down to a smooth finish
Application
  1. Apply 1 coat Ultra-Bond
  2. Apply 2 coats of Ultra-Coat
Products used