International Ph: +61 2 8625 4531  
 

Product Range



Key Properties

Green Building VOC Comparison Key Differenciators Application Methodolgy TDS and MSDS

Feature Articles

VOC

Rust

Timber

Ultra-MetalPrimer

  • Introduction
  • Advantages
  • Uses
  • Application
  • Technical Info
  • Cleanup
  • Storage

Ultra-MetalPrimer is specifically formulated to be applied directly onto *rusted metal surfaces. The product is ideal for use under Ultra-MetalTreat or other Ultralast top coats. For use on metal, rolled steel, mild steel, stainless steel, etc. Ultra-MetalPrimer powerfully resists rust creep from travelling underneath the painted surface!
Ultra-MetalPrimer removes the need for use of additional "Rust Killer / Converter" type products.

Additional advantages include:
  • Deep penetration into the substrate
  • Waterproofing properties
  • Excellent permeability
  • Good adhesion of the Ultra-Coat product
  • Ultra-MetalPrimer has a high fire and heat resistance
  • No chipping or scaling
  • Ultra-MetalPrimer is non-toxic and odourless
  • Corrosion resistant
  • Fungus and chemical substance resistance, e.g. acid, alkaline, etc
  • Rust creep resistant
Industrial bridge treated with Ultralast MetalTreat
Industrial bridge treated with Ultralast MetalTreat
  • Deep penetration
  • Waterproofing property
  • Excellent permeability
  • Good adhesion of the top coat
  • High fire resistance
  • No chipping or scaling
  • Anti-fungus, chemicals resistance such as acid, alkaline etc.
  • Non-toxic and odourless
  • Heat resistance
  • Ultra Violet resistance
  • Creep resistance

Ultra-MetalTreat is decsigned to protect metal from rust. It is suitable for application over the following surfaces:

  • Metal
  • Rolled steel
  • Mild steel
  • Stainless steel

All flux/scaling on welded areas should be removed.
All new surfaces should be cleaned with cleaner. Generally, one coat Ultra-MetalTreat is required before further application.

Surface Preparation

NOT TO BE USED WITH ANY OTHER RUST TREATMENT
Storage conditions
Room (moderate) temperature, tightly closed (sealed)
Colours
Black, Mod Red
Solid (%) by volume
56%
Gloss
Low sheen
Water resistance
Excellent
Abrasion resistance
Good
Corrosion resistance
Good
Spreading rate
10 to 12 m2 per litre at dried film thickness of 30-50 microns
 
Material Safety Data Sheet

Clean all equipment thoroughly with water immediately after use.

Keep containers well sealed.
Store at moderate temperatures.