Australia Ph: (03) 9852 0411   International Ph: +61 2 8625 4531   Ultralast Australia Pty Ltd

ultra-rubberguard

Material Safety Data Sheet

Ultra-Rubberguard is a UV resistant, acrylic based rubberising compound for corrosion protection and moderate abrasion applications. The coating can be applied up to 6 mm thick. Materials are water based and non-toxic. No noxious fumes during painting and no need for solvents. Multiple coats can be applied on the same day if higher dry film thickness is required. Not recommended for use on substrates that are permanently submerged in water.

Technical specifications

Colour
Black plus a limited range of colours
Vehicle type
Acrylic
Solvent
Water
Thinner
Must not be thinned
Specific gravity
1.1
% Solids by mass
56%
Fire index (SABS 0177-11I)
Class 3
Finish
Textured matt
Pigments
Rubber, organic pigments
Cleaner
Water
Flash point
Not flammable
Viscosity
Semi past consistency
% Solids by volume
59% minimum
Pot/shelf life
7 days/3 months

The normal spreading rate for Ultra-Linemark is 1 m2/litre at 25 micrometers Dry Film Thickness (DFT) on a smooth surface. However, a practical calculation is required for separate substrates.